This monoprinting kids craft is a cheerful hands-on project for kids, classrooms, and family craft time. It uses the tutorial steps below as the practical guide while adding helpful planning notes so the project feels easier to prepare, follow, and finish. Gather the supplies first, give yourself a little workspace, and enjoy making something creative from simple materials.
Materials:
Equipment:
Instructions:
Step 1: Find what you need
- Gather your supplies and materials.
Step 2: Set up your paint surface
- Rip off a piece of aluminum foil for the printing surface. Make sure it’s big enough for your paper to fit on.We also folded the edges under so there weren’t any sharp edges.
- Next, trace your paper on the foil. You’ll need to use cardstock, watercolor paper, or mixed media paper for your printing.
- Make a “frame” on the foil using painter’s tape. You can place the tape outside the traced lines or just a bit inside.
- Add tempera paint to the foil, inside the tape lines.
- Use a foam roller brush to spread the paint evenly inside the frame. You should have a nicely covered area, but not too thick a layer of paint.
Step 3: Draw your picture
- To make your picture, grab a few Q-tips (cotton swabs).Keep in mind that Q-tips aren’t all the same. Some seem to have more cotton on the ends, giving you a thicker, soft “paintbrush”. Other Q-tips will have a more firm end, meaning you can do thin details.
- Begin drawing in the paint with the Q-tip.Keep in mind that whatever you draw will be mirrored onto the paper, so if you want to draw your name or any specific details, they’ll need to be drawn backwards. That’s why it’s easiest to draw simple items that look good both ways.
- Try to use a different angle of the Q-tip for each line so the paint is removed cleanly.You can use both ends of the Q-tip to paint, or even switch to a new Q-tip partway through the picture if needed.
Step 4: Make the monoprint
- Now line up the paper, centering it over your picture.
- Push the paper down onto the foil and use your hands to pat it down. Try to press down on all areas, but don’t swipe back and forth. That can move the paint around, covering your drawing.
- Now peel the paper up to reveal the transferred print.
- Your monoprint is complete!
Helpful Tips
- Read through the full tutorial before starting.
- Prepare the listed supplies ahead of time so each step is easier to follow.
- Check the finished craft against the instructions before displaying or using it.
FAQs
Is this tutorial beginner friendly?
Yes. This monoprinting kids craft is written with simple steps and extra tips for beginners.
Can kids make this craft independently?
Older kids may be able to work independently, while younger kids should have help with any steps that require close attention or small pieces.
How long does the craft take?
Most versions take about 30 minutes, depending on the materials and the pace of the crafter.
Can I use different colors?
Yes. Changing the colors is one of the easiest ways to personalize the finished craft.
Final Thoughts
Once the monoprinting kids craft is finished, take a moment to check the details, compare the result with the tutorial, and display the project somewhere kids can enjoy their work.
Affiliate disclosure: This post may contain Amazon affiliate links. As an Amazon Associate, Easy Crafts Ideas may earn from qualifying purchases at no extra cost to you.
